Ford B-Max Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,105 Posts
The best way is to mount it high up, pop the cable under the roof lining, then down the door post into yhe fuse box (you need to take out the glove compartment to get to that).
The door post cover just pops off if you flick it up with a trim remover or plastic scraper (you could use a screwdriver if you're careful).
 
  • Like
Reactions: Dave-v-v

·
Registered
Joined
·
16 Posts
The best way is to mount it high up, pop the cable under the roof lining, then down the door post into yhe fuse box (you need to take out the glove compartment to get to that).
The door post cover just pops off if you flick it up with a trim remover or plastic scraper (you could use a screwdriver if you're careful).
Hi Any clue what fuse to use for dash cam and so on?
 

·
Registered
Joined
·
1,105 Posts
It depends whether you want it to switch on with the ignition (as I do) or have it running all the time using a motion detection mode. I can't remember which fuse mine is connect to off hand. In any event, the fuses are shown in the manual.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top