Ford B-Max Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Still got a tyre pressure warning lite having had a puncture.Trying to reset but no luck so far.
 

·
Registered
Joined
·
315 Posts
Welcome Pete.
<div align="center">Note:You should reset the systemfollowing any adjustment to the tyrepressures or any changing of tyres.1.Switch the ignition on.2.Using the information display control,navigate to Menu > Vehicle settings> Deflation detection.3.Press and hold the OK button untilconfirmation appears
 

·
Registered
Joined
·
264 Posts
My Bmax is on 25000 miles and two months ago, I had the Tyre Pressure Warning. Had it checked and it was a leaking valve, apparently the alloy corroded around the base of the valve. Had to replace the valve and sensor. Seemed it was 'just one of those things'.Yesterday the warning came back and now have two more valves and sensors replaced for the same reason. One more to go.
Should this be covered under the 3 year Warranty?
 

·
Registered
Joined
·
51 Posts
hi ..i work in the tyre business ..you should just be able to replace the valve..i believe the sensor unscrews from the bottom of the valve and refits a new one..alot cheaper than sensors.
 
1 - 6 of 6 Posts
Top