Ford B-Max Forum banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
341 Posts
The fuses in the fuse box will not have numbers on them. They are only numbered in the diagram to aid location.
Choose any ten amp fuse or test an empty slot for power when ignition is turned on and use that slot. If you use an existing slot you will need an adaptor that takes two fuses, usually supplied in the hard wire kit.
Remember to test the chosen fuse for power when ignition is turned on and no power when turned off ( unless you have parking surveilance on the camera ). Test BOTH sides of the fuse as the power will only flow in one direction which means if you only test one side you may get no response and think that it's a dead connection when ignition is on.
When i did my camera i had two connections as my cam has parking mode. I will take a photo tomorrow of how i wired mine in and post when i get chance.
 
1 - 1 of 1 Posts
Top